Logo Leibniz Universität Hannover
Logo: ISD/Leibniz Universität Hannover
Logo Leibniz Universität Hannover
Logo: ISD/Leibniz Universität Hannover
  • Zielgruppen
  • Suche
 
Suche nach
in in allen Feldern AutorTitelBeschreibung
Kategorie
Jahr
 

2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 alle Jahre

Artikel in Fachzeitschriften

A. Dean, S. Sahraee, J. Reinoso & R. Rolfes (2017): A new invariant-based thermo-plastic model for finite deformation analysis of short fibre reinforced composites: Development and numerical aspects, Composites Part B: Engineering 125, 241–258

A. Dean, S. Sahraee, K. Özenc, J. Reinoso, R. Rolfes & M.Kaliske (2017): A thermodynamically consistent framework to couple damage and plasticity microplane-based formulations for fracture modeling: Development and algorithmic treatment, International Journal of Fracture 203, 115–134

Alejandro Albanesi, Victor Fachinotti, Ignacio Peralta, Bruno Storti, Cristian Gebhardt (2017): Application of the inverse finite element method to design wind turbine blades, Journal: Composite Structures, Band 161, Seite(n): 160-172
DOI: 10.1016/j.compstruct.2016.11.039

Arash, B., Thijsse, B. J., Pecenko, A., & Simone, A. (2017): Effect of water content on the thermal degradation of amorphous polyamide 6, 6: A collective variable-driven hyperdynamics study, Polymer Degradation and Stability, 146, pp260-266

Ayan Haldar, José Reinoso, Eelco Jansen, Raimund Rolfes (2017): Thermally induced multistable configurations of variable stiffness composite plates: Semi-analytical and finite element investigation. , Composite Structures
DOI: 10.1016/j.compstruct.2017.02.014

Clemens Hübler, Cristian Guillermo Gebhardt, Raimund Rolfes (2017): Hierarchical four-step global sensitivity analysis of offshore wind turbines based on aeroelastic time domain simulations, Renewable Energy, Band: 111. Seite(n): 878-891
DOI: 10.1016/j.renene.2017.05.013

Clemens Hübler, Cristian Guillermo Gebhardt, Raimund Rolfes (2017): Development of a comprehensive database of scattering environmental conditions and simulation constraints for offshore wind turbines, Wind Energy Science, Band: 2, Seite(n) 491-505
DOI: https://doi.org/10.5194/wes-2-491-2017

Cristian Guillermo Gebhardt, Raimund Rolfes  (2017): On the nonlinear dynamics of shell structures: Combining a mixed finite element formulation and a robust integration scheme, Thin-Walled Structures, Band 118, Seiten 56-72
DOI: 10.1016/j.tws.2017.05.001

M. Bishara, R. Rolfes, O. Allix (2017): Revealing complex aspects of compressive failure of polymer composites – Part I: Fiber kinking at microscale, Composite Structures, Volume 169, 1 June 2017, Pages 105-115
DOI: https://doi.org/10.1016/j.compstruct.2016.10.092

Margarita Akterskaia, Eelco Jansen, Sina Hühne, Raimund Rolfes (2017): Efficient progressive failure analysis of multi-stringer stiffened composite panels through a two-way loose coupling global-local approach., Composite Structures
DOI: 10.1016/j.compstruct.2017.02.011

S.R. Nabavi, F. Haase, E. Jansen & R. Rolfes (2017): Monte-Carlo simulation of the cofiring process in polycrystalline silicon solar cells: Effects of heterogeneity and thickness uncertainties , Solar Energy Materials and Solar Cells, Vol 170, pp. 263-277

Sebastian Brandt, Matteo Broggi, Jan Häfele, Cristian Guillermo Gebhardt, Raimund Rolfes, Michael Beer (2017): Meta-models for fatigue damage estimation of offshore wind turbines jacket substructures, Procedia Engineering, Band 199, Seite(n): 1158-1163
DOI: 10.1016/j.proeng.2017.09.292

Stavroula Tsiapoki, Moritz W. Häckell, Tanja Grießmann, Raimund Rolfes (2017): Damage and ice detection on wind turbine rotor blades using a structural health monitoring framework
DOI: 10.1177/1475921717732730

Tobias Bohne, Tim Frerich, Jörg Jendrny, Jan-Patrick Jürgens und Vasily Ploshikhin  (2017): Simulation and validation of air flow and heat transfer in an autoclave process for definition of thermal boundary conditions during curing of composite parts, Journal of Composite Materials

Konferenzbeiträge

A. Dean, R. Rolfes, A. Behrens, A. Bouguecha, S. Hübner, C. Bonk & N. Grbic (2017): Finite strain anisotropic elasto-plastic model for the simulation of the forming and testing of metal/short fiber reinforced polymer clinch joints at room temperature, AIP Conference Proceedings 1896, Paper No. 030037

Alexandre Suryadi, Susanne Martens, Michaela Herr  (2017): Trailing-Edge Noise Reduction Technologies for Applications in Wind Energy, 23rd AIAA/CEAS Aeroacoustics Conference, Denver, Colorade, USA

B. Daum, A. Dean, R. Rolfes (2017): A systematic approach to invariant-based anisotropic non-associative plasticity for fiber reinforced composites, 21th International Conference on Composites Materials (ICCM21), Xi'an, China

C. Gerendt, E. Jansen, R. Rolfes (2017): A FATIGUE DAMAGE MODEL FOR FIBER METAL LAMINATES INCLUDING FIBER/MATRIX DEGRADATION, 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2017), Eindhoven, Netherlands

Clemens Hübler, Franziska Müller, Cristian Guillermo Gebhardt, Raimund Rolfes  (2017): Global Sensitivity Analysis of Offshore Wind Turbine Substructures, Proceedings of the 15th International Probabilistic Workshop, pp 341-352, Dresden

Cristian Gebhardt, Raimund Rolfes (2017): Gesamtdynamik von Windenergieanlagen mit besonderer Berücksichtigung der Wind-Struktur-Interaktion, Baustatik-Baupraxis 13, Bochum

H. Madhusoodanan, E. L. Jansen, R. Rolfes (2017): SIMULATION OF DAMAGE BEHAVIOR IN GFRPS IN THE VERY HIGH CYCLE REGIME, 7th International Conference on Very High Cycle Fatigue (VHCF7), Dresden, Germany

J. Häfele, C. Hübler, C. G. Gebhardt, R. Rolfes (2017): Reconsidering fatigue limit state load sets for jacket substructures utilizing probability distributions of environmental states, Proceeding of the Twenty-seventh (2017) International Ocean and Polar Engineering Conference San Francisco, CA, USA, June 25-30, 2017
ISBN: 978-1-880653-97-5

O.Bahrami, S.Tsiapoki, Michael B. Kane, J.P. Lynch, R.Rolfes (2017): Extraction of Environmental and Operational Conditions of Wind Turbine from Tower Response Data for Improved Structural Health Monitoring, the 11th International Workshop on Structural Health Monitoring (IWSHM 2017), Stanford University, California, USA

Ramin Mirzazadeh, Saeed Eftekhar Azam, Eelco Jansen, Stefano Mariani (2017): Uncertainty quantification in polysilicon MEMS through on-chip testing and reduced-order modelling. , 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE ), Dresden, Germany
DOI: 10.1109/EuroSimE.2017.7926242

Ricarda Berger, Jan Häfele, Benedikt Hofmeister, Raimund Rolfes (2017): Blend Repair Shape Optimization for Damaged Compressor Blisks, World Congress of Structural and Multidisciplinary Optimization, Braunschweig

S. Tsiapoki, J.P. Lynch, M.W. Häckell, and R. Rolfes (2017): Improvement of the damage detection performance of a SHM framework using AdaBoost: Validation on an operating wind turbine, 11th International Workshop on Structural Health Monitoring (IWSHM 2017), Stanford University, California, USA

van den Broek, Sander  (2017): Post-buckling behavior of a composite panel with spatially varying stochastic material parameters using Koiter's initial post-buckling method, Eingereicht / Book of Abstracts: 20th International Conference on Composite Structures, Paris, France

van den Broek, Sander  (2017): Effect of spatially varying stochastic material properties on the post-buckling behavior of composite panels using a reduced order model , Eingereicht / Book of Abstracts: 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES), Eindhoven, Netherlands

Buchbeiträge

Eelco Jansen (2017): Vibrations of composite shell-type structures, Stability and Vibrations of Thin Walled Composite Structures 12/2017: Seite(n) 429-459
DOI: 10.1016/B978-0-08-100410-4.00008-9
ISBN: 9780081004104

Michaela Herr, Roland Ewert, Benjamin Faßmann, Christof Rautmann, Susanne Martens, Claas-Hinrik Rohardt, Alexandre Suryadi  (2017): Noise Reduction Technologies for Wind Turbine, Notes on Numerical Fluid Mechanics and Multidisciplinary Design, New Results in Numerical and Experimental Fluid Mechanics XI. Editor: A. Dillmann, G. Heller, E. Krämer, R. Radespiel, and C. Wagner, Springer, Berlin-Heidelberg-New York
ISBN: ISBN 978-3-319-64518-6

Tanvir Rahman, Eelco Jansen (2017): The influence of initial geometric imperfections on composite shell stability and vibrations, Stability and Vibrations of Thin Walled Composite Structures, Seite(n) 509-548
DOI: 1016/B978-0-08-100410-4.00010-7
ISBN: 9780081004104

Tanvir Rahman, Eelco Jansen (2017): Computational aspects for stability and vibrations of thin-walled composite structures, Stability and Vibrations of Thin Walled Composite Structures, Seite(n) 693-734
DOI: 10.1016/B978-0-08-100410-4.00014-4
ISBN: 9780081004104

Technische Berichte

Christian Schröder, Klaus Thieken, Tim Gerlach, Jann-Eike Saathoff, Nikolai Penner, Andreas Ehrmann, Tanja Grießmann, Martin Achmus, Raimund Rolfes (2017): Schlussbericht zum Verbundprojekt Monitoring SBJ (Überwachung des Suction Bucket Jackets im Offshore Windpark Borkum Riffgrund 1)
DOI: /10.2314/GBV:1011240475

Häfele, J.; Gebhardt, C.G.; Rolfes, R. (2017): Innovative design of a hybrid-type jacket for 10MW turbines, Hannover

Vorträge

A. Dean, R. Rolfes, A. Behrens, A. Bouguecha, S. Hübner, C. Bonk & N. Grbic (2017): Finite strain anisotropic elasto-plastic model for the simulation of the forming and testing of metal/short fiber reinforced polymer clinch joints at room temperature , 20th International ESAFORM Conference on Material Forming (ESAFORM ), Dublin, Ireland

A.Haldar, E.Jansen, R. Rolfes (2017): Snap-through of Multistable Variable Stiffness Composites using Piezoelectric Actuators, Abstract in Proceedings / Book of Abstracts of: 20th International Conference on Composite Structures, Paris, France

Andreas Ehrmann, Cristian Guillermo Gebhardt, Raimund Rolfes  (2017): A Hierarchical Clustering Approach for Jacket Substructures for Offshore Wind Farms according to Location-Dependent Environmental Conditions, Wind Energy Science Conference, Lyngby

Andreas Ehrmann, Cristian Guillermo Gebhardt, Raimund Rolfes (2017): Hierarchical Clustering of Jacket Substructures for Offshore Wind Farms according to Location-Dependent Environmental Conditions, Wind Energy Systems Engineering Workshop, Roskilde

Clemens Hübler, Cristian Guillermo Gebhardt, Raimund Rolfes (2017): Development of a comprehensive data basis of scattering environmental conditions for offshore wind turbines, Wind Energy Science Conference, Kopenhagen, Dänemark

Clemens Hübler, Jan-Hendrik Piel, Michael H. Breitner, Raimund Rolfes  (2017): How Do Structural Designs Affect the Economic Viability of Offshore Wind Turbines? An Interdisciplinary Simulation Approach, International Conference on Operations Research, Berlin, Deutschland

Cristian Guillermo Gebhardt, Clemens Hübler, Karsten Schröder, Raimund Rolfes (2017): Coupled dynamics of wind turbines: a multiple-perspective approach, IEA Wind Task 11, Topical Expert Meeting # 88, Edinburgh, Schottland

H. Madhusoodanan, E. L. Jansen, R. Rolfes (2017): SIMULATION OF DAMAGE BEHAVIOR IN GFRPS IN THE VERY HIGH CYCLE REGIME, Conference on Very High Cycle Fatigue (VHCF7)

Jan Häfele, Clemens Hübler, Cristian G. Gebhardt, Raimund Rolfes (2017): An effective soil-structure interaction consideration approach for time domain simulations of offshore wind turbines, Präsentation, 7. GIGAWIND Symposium, Hannover

Johannes Fankhänel, Benedikt Daum, Eelco Jansen und Raimund Rolfes  (2017): Modellierung und Simulation des thermischen und mechanischen Verhaltens von Nanokompositen, FOR2021-Workshop, Clausthal, Germany

Johannes Fankhänel, Benedikt Daum, Raimund Rolfes  (2017): Numerical investigation of particle size and agglomeration effects on the mechanical properties of boehmite nanoparticle reinforced polymers, 20th International Conference on Composite Structures (ICCS), Paris, France

M.Akterskaia, E.Jansen, R.Rolfes (2017): Debonding Analysis of Stiffened Composite Panels Using a Two-Way Global-Local Loose Coupling Approach, Abstract in Proceedings / Book of Abstracts of: 20th International Conference on Composite Structures, Paris, France

M.Akterskaia, E.Jansen, S.Hühne, R.Rolfes (2017): Progressive Failure Analysis of Stiffened Composite Panels with Skin-Stringer Debonding and Intralaminar Damage using a Two-Way Loose Coupling Approach, Abstract in Proceedings / Book of Abstracts of: International Conference on Computational Fracture and Failure of Materials and Structures (CFRAC 2017), Nantes, France

Nikolai Penner, Christoph Tomann  (2017): Global Condition Parameters and Offshore Exposure Tests of a Mineral Corrosion Protection System, Präsentation, 7. GIGAWIND Symposium, Hannover

Nikolai Penner, Raimund Rolfes  (2017): Soil Stiffness Evaluation and Bearing Behavior of a Suction Bucket Jacket Prototype, International Modal Analysis Conference (IMAC XXXV)

R. Unger, B. Daum, U. Braun, R. Rolfes  (2017): Experimentally calibrated modeling technique for the cross linking mechanism of epoxy resin and its influence on mechanical properties, 20th International Conference on Composite Structures (ICCS), Paris, France

Tobias Bohne und Raimund Rolfes  (2017): Was Luftblasen und der Schweinswal mit der deutschen Energiewende zu tun haben, Ringvorlesung: "Faszination Akustik", Braunschweig